Carol Rose 48" Stainless Steel Linear Fire Pit - Manual - LED Lighting - OL48TP18N / P
Carol Rose 48″ Stainless Steel Linear Fire Pit – Manual Ignition with LED Lighting (OL48TP18P)
The Carol Rose 48″ Linear Fire Pit (OL48TP18) pairs a 48" continuous stainless-steel burner with integrated dual-strip multi-color LED lighting to create a dramatic outdoor focal point. The system delivers up to 55,000 BTU with manual valve ignition and battery-assisted LED/monitoring features for reliable outdoor use.
- Long linear flame for consistent visual impact across patios and commercial terraces.
- Built-in multi-color LED strips provide ambient lighting even when the burner is off.
- Marine-grade stainless construction resists corrosion and simplifies maintenance.
- Manual ignition and AA battery backup keep operation independent of house power.
Quick Facts
- Category: GAS — Input BTU: 55,000 BTU (Max) / 39,500 BTU (Min NG)
- Venting: Outdoor (open-air installation / vent-free style)
- Thermostat: No · Smart-Ready: No
- Manual (PDF): Installation & Owner’s Manual (link below)
Technical Specifications
| Brand | Carol Rose Collection |
|---|---|
| Model | OL48TP18N / OL48TP18P |
| Type | Outdoor Linear Freestanding / Drop-In Fire Pit (LED version) |
| SKU / MPN | OL48TP18 |
| Fuel | Natural Gas (N) or Propane (P) |
|---|---|
| Input BTU (Hi / Lo) | 55,000 BTU / 39,500 BTU (Natural Gas min rate) |
| Venting | Outdoor (vent-free style) |
| Thermostat | No |
| Smart Ready | No |
| Ignition | Manual control valve / push-button; AA battery backup for LED/monitoring |
|---|---|
| Controls | Manual valve with LED power/monitoring circuit (battery) |
| Conversion | Factory configuration per model; conversion only with factory kit and licensed technician |
| Overall Length | 48 Inches (nominal) |
|---|---|
| Product Dimensions (W × H × D) | Approx. 53" W × 7 3/8" H × 23 7/8" D |
| Opening / Framing (per manual) | 13 11/16" Depth × 46 7/8" Width |
| Material | Marine-grade stainless steel (visible surfaces) |
| Manual (PDF) | Installation & Owner’s Manual — OL48TP18 series (PDF) |
|---|---|
| Brochure (PDF) | Carol Rose Outdoor Products Brochure (PDF) |
FAQs
Is electricity required for the LED and ignition?
Manual ignition does not require house power, but the LED lighting and flame monitoring use an AA battery backup. External house power is not required for basic operation.
Where can this unit be installed?
Outdoor use only in open-air or properly ventilated patio settings. It must not be used indoors or in enclosed spaces. See the manual (PDF) for enclosure guidance.
Can the unit be converted between Natural Gas and Propane?
Models are shipped configured for a specific fuel. Conversions require a factory conversion kit and must be performed by a licensed gas technician.
What decorative media should I use for LED effect?
Use crushed translucent glass media (manufacturer-approved) to maximize LED diffusion. Do not cover electrodes or thermocouple; follow the manual’s media placement instructions.
How often should the burner be inspected?
Inspect the burner and control compartment annually. Keep the burner area clean and free from debris for safe operation.
Is a thermostat or smart control supported?
No—this model is not thermostat-ready or smart-home enabled out of the box.
How does OL48TP18 compare to the non-LED OL48TP10 model?
The OL48TP18 adds dual-strip LED lighting and battery monitoring; the OL48TP10 focuses on burner performance without integrated LED lighting.
See the Installation & Owner’s Manual (PDF) for full specs and installation instructions.
Warranty
Short summary: Manufacturer’s limited warranty covering defects in materials and workmanship under normal use. Warranty terms vary by component type.
Coverage
| Component | Term | Notes |
|---|---|---|
| Major stainless steel components | Up to 5 years | Coverage depends on model and usage |
| Controls, LED lighting & electronics | 1 year | Batteries excluded |
Exclusions & Conditions
- Applies to the original purchaser only.
- Warranty is void if unit is installed indoors, altered, abused, or modified from original configuration.
- Improper installation, lack of maintenance, or use of unapproved media may void coverage.
Claim Steps
- Gather model/serial information and proof of purchase.
- Contact the place of purchase or the official support portal listed in Documents & Support.
- Follow the manufacturer’s instructions for returning parts or filing a claim; provide photos and serial numbers as requested.
If specific warranty PDF or portal links are required, consult your dealer or the manual (PDF) for exact claim submission details.
Manuals & Installation
From the Manual
"This fireplace is for outdoor use only."
"Do not use this appliance if any part has been under water."
Pre-Installation Checklist
- Confirm correct fuel type (Natural Gas or Propane) before ordering and installation.
- Verify opening/framing matches manual minimums (see Specs → Opening / Framing).
- Provide proper combustion and ventilation air per ANSI Z223.1 / local codes.
- Prepare tools and materials: screwdrivers, adjustable wrench (hand-tighten quick fittings only), AA batteries for LED/ignitor, approved crushed translucent glass media.
- Hire a licensed gas/hearth technician for all gas connections and leak testing.
Compliance & Safety
Follow local building and gas codes. Remove any protective films from stainless surfaces before first use. Keep the burner area free of debris; do not operate with weather cover in place.
Related models & accessories: PureFlameCo — Linear Fire Pits collection