Dimplex IgniteXL 100-In Electric Fireplace - XLF100
Dimplex IgniteXL 100-In Linear Electric Fireplace (XLF100)
The IgniteXL 100-inch Linear Electric Fireplace (Model XLF100) provides sweeping panoramic flames, dual-voltage power, and elegant built-in installation. With heater and flame-only modes, it delivers supplemental heat up to ~1,000 sq ft, all with edge-to-edge glass and a slim depth that requires no external venting. Remote control and built-in thermostat included.
- Dual heat modes — full heat / flame-only
- LED flame color themes and remote + touch controls
- Front-vented design; built-in or recessed installation
- No chimney or external vent required
Quick Facts
- Power: 1,500 W / 2,500 W
- BTU: ~5,118 / ~8,530 BTU
- Heating Coverage: supplemental heat up to ~1,000 sq ft
- Electrical: 120 V or 240 V circuit; ~10.4 / ~12.5 A
- Dimensions (W×H×D): ~100-5⁄8″ × 15-5⁄8″ × 5-7⁄8″
- Warranty: 5-Year Limited Manufacturer Warranty
Technical Specifications
| Brand | Dimplex |
|---|---|
| Model | IgniteXL 100-In (XLF100) |
| SKU / MPN / GTIN | XLF100 / XLF100 / — |
Performance
| Power | 1,500 W / 2,500 W |
|---|---|
| Approx. BTU | ~5,118 / ~8,530 |
| Supplemental Heat | Up to ~1,000 sq ft |
Installation
| Electrical | 120 V or 240 V circuit; ~10.4 / ~12.5 A |
|---|---|
| Venting | Front-vented; no external vent required |
| Install Types | Built-in or recessed installation |
Size & Weight
| Overall Dimensions (W×H×D) | ~100-5⁄8″ × 15-5⁄8″ × 5-7⁄8″ |
|---|---|
| Viewing Area | ~100″ × ~16″ |
| Weight | — lb (spec not verified) |
Documents (PDF): Owner’s Manual (PDF)
FAQs
Can the flame operate without heat?
Yes — flame effects work independently of heat, so you can run flame-only mode for ambiance.
What are the electrical requirements?
Requires 120V or 240V dedicated circuit; approx. 10.4 / 12.5 A. See the manual (PDF).
How much area will it heat?
Provides supplemental heat up to ~1,000 sq ft; performance depends on insulation and climate.
Is venting required?
No external vent or chimney needed; front vented design covers airflow.
What warranty is included?
5-Year Limited Manufacturer Warranty.
How much does it cost to run?
Use: cost/hr = (watts ÷ 1,000) × local $/kWh. Example: 2,500 W ≈ 2.5 × your rate per hour.
Warranty
Dimplex IgniteXL 100-In (XLF100) — Manufacturer warranty: 5-Year Limited.
Coverage
| Component | Term | Notes |
|---|---|---|
| Firebox / Heater / Controls | 5 years | Materials & workmanship under normal residential use. |
| Finish / Glass | 5 years | Against defects; excludes damage from misuse or cleaning chemicals. |
Exclusions & Conditions
- Original purchaser required; proof of purchase required for warranty.
- Improper installation, misuse, or unauthorized modifications void warranty.
- Labor, transport, and routine wear & cleaning not covered unless specified.
Manuals & Installation
- Owner’s Manual: Download (PDF)
From the Manual
“Openings labelled A, B, C, D represent framing dimensions for XLF100.”
“Use only front vented configuration; keep the bottom of unit between 30-40 in from floor for optimal viewing.”
Pre-Install Checklist
- Verify wall opening width ~100-5⁄8″, height per manual spec (~15-5⁄8″), depth ~5-7⁄8″
- Provide dedicated 120V or 240V circuit per specifications
- Ensure structural support for the wide, heavy frame
- Maintain unobstructed front glass and vent area
Compliance & Safety
Install according to manual and comply with all local electrical, building and safety codes. Hard-wiring should be done by licensed electrician.
Disconnect power before servicing. Glass cool-touch; heater outlets may warm during use.