Dimplex Ignite Evolve 74-in Linear Electric Fireplace - EVO74
The Ignite Evolve 74-inch Linear Fireplace (Model EVO74) combines ultra realistic Multi-Fire XD flame effects and driftwood/tumbled media with dual heat settings (1,500/2,500 W). It provides supplemental heating up to ~1,000 sq ft while letting you run flame-only mode for visual ambiance without heat.
- Five flame speed settings + color media (tumbled glass & driftwood)
- Heater mode or flame-only mode; includes Comfort$aver® heating and heat boost
- Slim built-in/recessed edge-to-edge design; installs flush or with minimal trim, no venting needed
- Remote, touch controls, and app control via Flame Connect
Quick Facts
- Power: 1,500 / 2,500 W • 120 / 240 V
- BTU Output: ~5,118 / ~8,530 BTU — corresponds to the dual-voltage modes
- Heating Coverage: up to ~1,000 sq ft
- Dimensions: approx. 75½″ W × 16½″ H × 5 ⅞″ D (viewing area ~72¾″ × 12″) :contentReference[oaicite:0]{index=0}
- Weight: ~105 lb :contentReference[oaicite:1]{index=1}
- Warranty: 5-Year Limited Manufacturer Warranty
Technical Specifications
| Brand | Dimplex |
|---|---|
| Model | Ignite Evolve 74 (EVO74) |
| SKU / MPN / GTIN | 500002608 / EVO74 / — |
Performance
| Power Settings | 1,500 W / 2,500 W |
|---|---|
| Voltage | 120 V or 240 V |
| BTU Output | ~5,118 / ~8,530 BTU |
| Heating Capacity | Up to ~1,000 sq ft |
| Flame / Media Features | Multi-Fire XD flame effect; adjustable flame speed; driftwood & tumbled glass media; color themes/media presets |
Installation
| Electrical | Hard-wire 120 V / 240 V dedicated circuit; plug-in option for 120 V where allowed; matches current draw for dual modes (~12.4 A / ~10.4 A) :contentReference[oaicite:2]{index=2} |
|---|---|
| Venting | Front venting only; no external duct, chimney, or flue required |
| Framing | Rough opening ~74 5/8″ W × 16″ H × ~5 ½″ D; slim depth allows flush or recessed wall installation :contentReference[oaicite:3]{index=3} |
Size & Weight
| Overall Dimensions (W×H×D) | ~75½″ × 16½″ × 5 ⅞″ |
|---|---|
| Viewing Area | ~72¾″ × 12″ |
| Weight | ~105 lb |
Documents (PDF): Owner’s & Installation Manual (PDF)
FAQs
Can the flame run without heat?
Yes — the flame and media effects work independently of the heater. Use flame-only mode for ambiance.
What are the electrical requirements?
This fireset requires a dedicated 120 V or 240 V circuit; currents ~12.4 A at 120 V or ~10.4 A at 240 V. See the manual (PDF).
How large an area will it heat?
Designed to supplement heat up to ~1,000 sq ft; actual performance depends on insulation, climate, and installation.
Is external venting required?
No — venting is entirely front-facing; no external flue or ductwork needed.
What is the viewing size?
Visible glass window is ~72¾″ wide × ~12″ high. :contentReference[oaicite:4]{index=4}
What warranty is included?
5-Year Limited Manufacturer Warranty covering defects in materials and workmanship.
How much does this cost to run?
Estimate: cost/hr = (watts ÷ 1,000) × your local $/kWh. Example: 2,500 W ≈ 2.5 × your rate per hour.
Warranty
Dimplex Ignite Evolve 74 (EVO74) — Manufacturer warranty: 5-Year Limited.
Coverage
| Component | Term | Notes |
|---|---|---|
| Firebox / Heater / Controls | 5 years | Defects in materials and workmanship under normal residential use. |
| Media / Glass / Finish | 5 years | Against manufacturing defects; excludes misuse or damage from improper cleaning or installation. |
Exclusions & Conditions
- Applicable only to original purchaser; proof of purchase required.
- Improper installation, modifications, or misuse void warranty.
- Labor, shipping, or incidental charges are not included unless explicitly stated.
Manuals & Installation
- Owner & Installation Manual: Download (PDF)
From the Manual
“Rough opening (framing): 74-5/8″ W × 16″ H × 5-½″ D.”
“Watts: 1,500/2,500 • BTU: 5,118 / 8,530 • Amps: 12.4 / 10.4.”
Pre-Install Checklist
- Build framing opening ~74-5/8″ W × 16″ H × 5-½″ D to accommodate unit flush or recessed
- Provide a dedicated 120 V or 240 V circuit per your configuration
- Ensure wall or structure supports ~105 lb weight
- Keep front glass and front vent clearance unobstructed; trim or finish per local code
Compliance & Safety
Install per the manufacturer manual and comply with all local building and electrical codes. Hard-wiring should be done by a licensed electrician.
Disconnect power before servicing. Glass stays cool; heater vents may get warm—avoid obstruction.