Dimplex Ignite Aspire 42 Inch Built In Electric Fireplace - ASP42
Dimplex Ignite Aspire® 42-Inch Built-In Electric Firebox (ASP42)
The ASP42 provides dynamic flame visuals with dual-voltage heating, delivering supplemental heat up to ~1,000 sq ft. Designed for built-in installation without venting, it features advanced LED flame effects and optional heater disable for ambiance only.
- Dynamic-Fire flame effect with Inner-Glow logs and LED color themes
- Heater mode or flame-only mode for flexible use
- Control via remote, app, or onboard touch
- Four installation orientations: front, left-corner, right-corner, or bay-style
Quick Facts
- Power: 1,500 W (120 V) / 2,500 W (240 V)
- BTU: ~5,118 / ~8,530
- Heating Coverage: supplemental heat up to ~1,000 sq ft
- Electrical: 120 V or 240 V circuit
- Weight: ~104 lb
- Warranty: 5-Year Limited Manufacturer Warranty
Technical Specifications
| Brand | Dimplex |
|---|---|
| Model | Ignite Aspire® ASP42 |
| SKU / MPN / GTIN | 500003049 / ASP42 / — |
Performance
| Power | 1,500 W @ 120 V • 2,500 W @ 240 V |
|---|---|
| Approx. BTU | ~5,118 / ~8,530 |
| Supplemental Heat | Up to ~1,000 sq ft |
Installation
| Electrical | 120 V (3-wire) or 240 V (4-wire) circuit |
|---|---|
| Venting | Non-venting; no chimney required |
| Install Types | Front-facing, left-corner, right-corner, or bay-style |
Size & Weight
| Viewing Area | 42" W × 37" H |
|---|---|
| Overall Dimensions (W×H×D) | 42-5/8″ × 37″ × 17-1/2″ |
| Framing Opening (W×H×D) | 42-3/4″ × 47″ × 18″ |
| Weight | 104 lb |
Documents (PDF): Owner’s & Installation Manual ASP42 (PDF)
FAQs
Can the flame run without heat?
Yes — the heater can be disabled permanently; flame effects run independently for ambiance only.
What are the electrical requirements?
Requires either 120 V (3-wire) or 240 V (4-wire) dedicated circuit. See the manual (PDF) for wiring details.
How much area can this model heat?
Supplemental heat up to ~1,000 sq ft; actual performance depends on insulation and climate.
Is venting or chimney needed?
No — this is non-venting electric; no chimney or external vent required.
What warranty is included?
5-Year Limited Manufacturer Warranty.
How much does it cost to run?
Use: cost/hr = (watts ÷ 1,000) × local $/kWh. Example: 2,500 W ≈ 2.5 × your rate per hour.
Warranty
Dimplex Ignite Aspire® ASP42 — Manufacturer warranty: 5-Year Limited.
Coverage
| Component | Term | Notes |
|---|---|---|
| Firebox / Heater / Controls | 5 years | Materials and workmanship under residential use. |
| Finish / Glass | 5 years | Against defects in finish or glass itself (excluding damage / misuse). |
Exclusions & Conditions
- Original purchaser required; proof of purchase must be presented.
- Damage due to improper installation, misuse, or modifications voids the warranty.
- Labor, shipping, normal wear, and external factors are not covered.
Manuals & Installation
- Owner & Installation Manual: Download (PDF)
Pre-Install Checklist
- Verify framing opening: 42-3/4″ W × 47″ H × 18″ D
- Provide dedicated 120 V or 240 V electrical circuit per spec
- Ensure structural support for ~104 lb unit weight
- Allow front access to controls; leave clearance as per manual
Compliance & Safety
Install per the official manual and comply with all local electrical and building codes.
Disconnect power before any servicing. Glass is cool-touch; heater outlets may radiate heat.