Dimplex IgniteXL Bold 50-In Smart Linear Electric Fireplace - XLF5017
This Bold 50-Smart model elevates linear fireplace design with Multi-Fire XD™ flame visuals, app + remote + touch controls, and dual-voltage heating (1,500 / 2,500 W). It supports flame-only mode and heater mode for supplemental warmth, and installs built-in or recessed without external venting.
- Multi-Fire XD flame effects + Prism & color themes for flame/media bed
- Smart connectivity + app control, remote + touch interface
- Comfort$aver heating: efficient ceramic heater, heat / flame modes
- Flexible installation: built-in, corner, bay; no chimney required
Quick Facts
- Power: 1,500 / 2,500 W • Voltage: 120 V / 240 V
- BTU: ~5,118 / ~8,530 BTU
- Heating Capacity: supplemental heat up to ~1,000 sq ft
- Electrical Draw: ~12.5 A at 120 V, ~10.4 A at 240 V
- Dimensions: ~50½″ W × 23⅞″ H × 12⅛″ D (deep depth includes trim) :contentReference[oaicite:0]{index=0}
- Warranty: 5-Year Limited Manufacturer Warranty :contentReference[oaicite:1]{index=1}
Technical Specifications
| Brand | Dimplex |
|---|---|
| Model | IgniteXL Bold 50-Smart (XLF50-Bold / XLF5017-XD) |
| SKU / MPN / GTIN | XLF50-Bold / 50000xxxx / — |
Performance
| Power | 1,500 W / 2,500 W |
|---|---|
| BTU Output | ≈ 5,118 / 8,530 BTU |
| Heating Capacity | Up to ~1,000 sq ft (supplemental) |
| Flame / Media Features | Multi-Fire XD flame effects; Prism/color themes; driftwood & acrylic crystal media bed; flame speed presets |
Installation
| Electrical | Hardwire or plug-in; 120 V / 240 V dedicated circuit; typical draw ~12.5 A / ~10.4 A |
|---|---|
| Venting | Front vented; no external chimney or flue required |
| Mounting Options | Built-in / corner / bay / recessed installations |
Size & Weight
| Overall Dimensions (W×H×D) | ~50½″ × 23⅞″ × 12⅛″ deep (with trim) :contentReference[oaicite:2]{index=2} |
|---|---|
| Weight | — lb (not verified publicly) |
Documents (PDF): Owner’s & Installation Manual (PDF) · Ignite Bold Manual (PDF)
FAQs
Can the flames run without heat?
Yes — flame-only mode allows ambient visuals without providing heat.
What are the electrical requirements?
Requires 120 V or 240 V dedicated circuit; ~12.5 A at 120 V or ~10.4 A at 240 V. See the manual (PDF).
How large of a space can this warm?
Provides supplemental heating for up to ~1,000 sq ft, depending on insulation and climate.
Is venting or chimney needed?
No — this unit vents out of the front only; no external flue or chimney required.
What are the installation options?
Built-in, corner, bay or recessed install configurations are supported. See the Specs & Manual for framing details.
What is the warranty?
5-Year Limited Manufacturer Warranty covering parts / defects in materials and workmanship.
How much does it cost to run?
Estimate cost/hr = (watts ÷ 1,000) × your local $/kWh. Example: 2,500 W ≈ 2.5 × your rate per hour.
Warranty
Dimplex IgniteXL Bold 50-Smart — Manufacturer Warranty: 5-Year Limited.
Coverage
| Component | Term | Notes |
|---|---|---|
| Firebox / Heater / Controls | 5 years | Defects in materials or workmanship under normal residential use. |
| Glass / Media / Finish | 5 years | Against manufacturing defects; excludes damage from misuse or cleaning damage. |
Exclusions & Conditions
- Warranty valid for original purchaser with proof of purchase.
- Improper installation, misuse, modifications void warranty.
- Labor, shipping, or incidental costs typically not covered unless explicitly stated.
Manuals & Installation
- Owner’s & Installation Manual: Download (PDF)
- Ignite Bold Instruction Manual (alternate): PDF
From the Manual
“Electrical Rating: Voltage: 120/240 V • Power: 1,500/2,500 W • BTU: 5,118 / 8,530.” :contentReference[oaicite:3]{index=3}
“Flexible display: front-facing, corner or bay-style options.” :contentReference[oaicite:4]{index=4}
Pre-Install Checklist
- Frame opening built per manufacturer spec, allowing for ~50½″ width, ~23⅞″ height, ~12⅛″ depth including trim
- Provide dedicated 120 V or 240 V circuit consistent with local code
- Ensure wall support for the unit’s weight and size
- Leave front vent and glass face unobstructed; ensure access for servicing
Compliance & Safety
Install according to manual instructions and all local electrical and building codes. Use licensed electrician for hard-wired connections.
Disconnect power before servicing. Glass remains fairly cool; heater and vent areas may warm—avoid obstructing airflow.