Empire Rushmore TruFlame Clean Face 40" - DVCT40CBP95P/N
Empire Rushmore Clean-Face 40″ TruFlame Direct Vent Fireplace
The Rushmore 40 Clean-Face integrates TruFlame® dual-burner flame technology for deep ember glow, lively flame effects, and modern control flexibility. Available in natural gas or propane, this direct-vent unit produces up to 47,500 BTU and offers both ambient flame-only or heating mode. Its clean edge-to-edge glass and zero-louver front allow a sleek finish right to the surround edges.
- Dual burner TruFlame for high realism and flame control
- Up to 47,500 BTU heat output (Natural Gas spec) 0
- Remote control with thermostat, flame height, accent light control 1
- Zero-louver “clean face” enables tile/stone finish to edge
- Direct vent (5×8 in) design, no chimney required
Quick Facts
- Fuel options: Natural Gas / Propane 2
- BTU Output: 47,500 / 14,500 (Nat gas max/min) 3
- Venting: 5″ × 8″ direct vent system 4
- Framing Opening: approx. 49½″ W × 53½″ H × 24″ D 5
- Viewing Glass: ~40¼″ W × 31⅜″ H (approx) 6
- Warranty: 10-year on combustion chamber / lifetime on glass; others 3 yrs 7
Technical Specifications
| Brand | Empire |
|---|---|
| Model | Rushmore Clean-Face 40 (DVCT40CBP) |
| Type | Direct Vent Gas Fireplace |
Performance
| Max BTU (Nat) | 47,500 BTU/h |
|---|---|
| Min BTU (Nat) | 14,500 BTU/h |
| Fuel Types | Natural Gas / Propane |
| Ignition / Controls | Electronic with Multi-function Remote, flame & thermostat control |
Installation / Venting
| Venting | Direct vent, 5″ × 8″ coaxial vent |
|---|---|
| Framing Opening | ~49½″ W × 53½″ H × 24″ D |
| Glass / Viewing | ~40¼″ × 31⅜″ (approx) |
| Barrier / Screen | Fine-mesh barrier screen included |
Dimensions / Weight
| Actual Dimensions (W×H×D) | ~49″ × 42¾″ × 24″ 8 |
|---|---|
| Weight | ~310 lb 9 |
Documents (PDF): Product Brochure / Spec (PDF) · Owner / Installation Manual (PDF)
FAQs
Does the flame operate without heat?
Yes — you can run flame-only mode without activating the heater via remote control.
What venting is required?
This model uses a 5″ × 8″ direct-vent coaxial system — no chimney required. 10
What is the heat output?
Up to 47,500 BTU/h (natural gas) in high mode. 11
What fuel types are supported?
Natural gas or propane configurations are available. 12
Is a blower included?
No — blower is optional; many installations pair an optional blower kit for better room circulation. 13
What warranty coverage is provided?
10-year limited on the combustion chamber, lifetime on glass, and 3 years on other parts. 14
Warranty
Empire Rushmore Clean-Face 40 (DVCT40CBP) — Limited warranty: 10-year on combustion chamber, lifetime on glass, 3-year on parts. 15
Coverage
| Component | Term | Notes |
|---|---|---|
| Combustion Chamber | 10 years | Structural defects for original purchaser. |
| Glass / Barrier Screen | Lifetime | Manufacturing defects only. |
| Other parts (blower, electronics, logs, etc.) | 3 years | Wear/part failure. |
Exclusions & Conditions
- Valid only for original purchaser with proof of purchase.
- Damage due to improper installation or misuse voids coverage.
- Labor, shipping, and installation costs not covered unless noted.
Manuals & Installation
- Owner / Installation Manual: Download (PDF)
- Product / Spec Brochure: Download (PDF)
Pre-Install Checklist
- Verify venting layout (5″ × 8″ coaxial) and clearances per the manual.
- Frame opening to ~49½″ W × 53½″ H × 24″ D.
- Provide proper gas line (NG or LP) and electrical (120 V) per specs.
- Ensure heat-rated surround materials (tile, stone) used right to clean-face edge.
- Plan for optional blower and lighting wiring if desired.
Compliance & Safety
Install to local building and gas codes in accordance with Empire’s manual. Use qualified installer. Flush vent runs, proper seals, and correct parts only.
Disconnect gas power before service. Keep barrier screen in place. Clean glass only when cool, using recommended fireplace glass cleaner. 16